Tagina Fucina 12x12 Mosaic

The tile surfaces with an "iridescent metal effect" of the collection FUCINA can get by time and trample some minimum variations of colour and brightness that give to the product a characteristical effect of "natural timeworn", it's not a defect, but a wanted and seeked particularity, that exalts the "magnificent imperfections". The same surfaces, shows simetimes some rings of different extention,rings that represent a characteristic of the product. Material suitable for the following employments:Residential, light commercial and assimilable employments (for example shops,restaurants,and bars with protected entrance );excluded areas with an intense and heavy traffic.
Caution: In the cleaning and in the maintenance of the tiles it's recommended to don't use absolutely acid or alkaline detergents: please use EXCLUSIVELY PRODUCTS WITH NEUTRAL PH (for example like :Fila Cleaner or Faber Floor Cleaner.) and detergents with a neutral pH with surface-active agents not ionic. It's recommended to let the detergent rest on the tiles for about 10-20 minutes maximum; then mop up with the floor cloth and properly wash with water. In the laying operations it's recommended a joint not lower than 2.mm
For the grouting of joints we suggest to use ULTRACOLOR or KERAKOLOR FF/GG (MAPEI)(OR SIMILAR PRODUCTS WITH SAME CHARACTERISTICS) mixed with water.
We recommend to clean up the putty from the floor as soon as possible:when the joint mixture looses his plasticity (in normal conditions this happens in about 15-30 minutes) clean up the residuals with a damp cellulose sponge,rinsing frequently the same sponge in clean water. If the product may be hardened ,use a damp pad like "scotch Brite Blu" we absolutely don't recommend to use KERAPOXY e KERAKOLOR added with FUGOLASTIC OR SIMILAR PRODUCTS. Considering that metal-effect glazes are particularly sensible to the scratching agents, we don't recommend to use abrasive means for the cleaning of the joint.